BMW 3 (Thunder) для тюнинга в Украине

Suspension Techniques ST Coilovers BMW 3-Series E90/92 06-11 (90232)

Suspension Techniques ST Coilovers BMW 3-Series E90/92 06-11

Model: 90232

Производитель: Energy Suspension

Suspension Techniques ST coilovers are manufactured by KW. This product line takes the experience that KW is known for and applies it to the ST line of coilovers. The new KW ST Coilover product line is to introduce the rookies a better way to indulge that car of theirs. As the growing trend of people wanting the best bang for the buck, the ST product line provides that and much more with thorough knowledge of a top of a line coilover systems. The ST Coilover system is built from Galvanized Steel housing for the durability KW is known so well for. The Compression and Rebound preset at the factory to optimize a balance between performance and comfort. On top of that, the new ST Coilovers have the stamp of quality any KW suspension emerges from the factory with the ever so height adjustable components for the personalized look and feel. This is easily accomplished with KW’s own TUV tested lowering range.

Construction:-Composite Spring Cap - Light weight polyamide contstruction, noise-absorbing composite material reduces vibration sounds and isolates noises associated with chasis, and corrosion resistant.
-Helper Spring - Wound of low profile wire for a minimal stack height and pre-loads main spring to prevent unnecessary movement and noise.
-Hardened chromed Piston Rod
-Compression Bumpstop with Integrated Dust Boot - Made of high-quality load absorbing, elastomer synthetics providing additional ride comfort, protection of internal valve components, integrated dust boot provides piston, rod protection from contamination from dirt, water and stone chips, and highly resilient for long term durability.
-High-Strength Springs - Race style spring provides lower amount of wound coils for lighter weight and minimized coil-binding and multi-level tempering process (annealing, shot peening, JIG testing, UV-test, Phosphate coating, EPS coating) for long term durability.
-Zinc Plated Strut Housings - Coated for corrosion resistance and long term durability.

With the new ST Suspension Coilover an its Twin-Tube shock absorber, the piston works inside of an inner Tube. The space between the inner tube and the casing is used as an equalization chamber. Changes in volume due position of the piston rod change the oil level in the equalization chamber between the outer casing and inner Tube.

The ST Suspension is an Excellent all around performance, providing a balance between performance and comfort for everyday use. It uses the technology of twin-tube giving the driver the independent reactions from damping inputs to minimize chassis vibrations and it ultimately increases driving dynamics.

In combination with stock wheels and tires, wheel spacers might be necessary for sufficient clearance.

Lowering Specs:
in mm-Front:30-60
-Rear:25-55

in inches-Front:1.2"-2.4"
-Rear:1.0"-2.2"

Цена: 1221.86$

0

Постоянная ссылка на данный товар:
http://toprpm.com.ua/products/suspension-techniques-st-coilovers-bmw-3-series-e9092-06-11-80404.html

1221.86$

0

Suspension Techniques ST Coilovers BMW 3-Series E93 06-11 (90233)

Suspension Techniques ST Coilovers BMW 3-Series E93 06-11

Model: 90233

Производитель: Energy Suspension

Suspension Techniques ST coilovers are manufactured by KW. This product line takes the experience that KW is known for and applies it to the ST line of coilovers. The new KW ST Coilover product line is to introduce the rookies a better way to indulge that car of theirs. As the growing trend of people wanting the best bang for the buck, the ST product line provides that and much more with thorough knowledge of a top of a line coilover systems. The ST Coilover system is built from Galvanized Steel housing for the durability KW is known so well for. The Compression and Rebound preset at the factory to optimize a balance between performance and comfort. On top of that, the new ST Coilovers have the stamp of quality any KW suspension emerges from the factory with the ever so height adjustable components for the personalized look and feel. This is easily accomplished with KW’s own TUV tested lowering range.

Construction:-Composite Spring Cap - Light weight polyamide contstruction, noise-absorbing composite material reduces vibration sounds and isolates noises associated with chasis, and corrosion resistant.
-Helper Spring - Wound of low profile wire for a minimal stack height and pre-loads main spring to prevent unnecessary movement and noise.
-Hardened chromed Piston Rod
-Compression Bumpstop with Integrated Dust Boot - Made of high-quality load absorbing, elastomer synthetics providing additional ride comfort, protection of internal valve components, integrated dust boot provides piston, rod protection from contamination from dirt, water and stone chips, and highly resilient for long term durability.
-High-Strength Springs - Race style spring provides lower amount of wound coils for lighter weight and minimized coil-binding and multi-level tempering process (annealing, shot peening, JIG testing, UV-test, Phosphate coating, EPS coating) for long term durability.
-Zinc Plated Strut Housings - Coated for corrosion resistance and long term durability.

With the new ST Suspension Coilover an its Twin-Tube shock absorber, the piston works inside of an inner Tube. The space between the inner tube and the casing is used as an equalization chamber. Changes in volume due position of the piston rod change the oil level in the equalization chamber between the outer casing and inner Tube.

The ST Suspension is an Excellent all around performance, providing a balance between performance and comfort for everyday use. It uses the technology of twin-tube giving the driver the independent reactions from damping inputs to minimize chassis vibrations and it ultimately increases driving dynamics.

In combination with stock wheels and tires, wheel spacers might be necessary for sufficient clearance.

Lowering Specs:
in mm-Front:30-60
-Rear:20-50

in inches-Front:1.2"-2.4"
-Rear:0.8"-2.0"

Цена: 1221.86$

0

Постоянная ссылка на данный товар:
http://toprpm.com.ua/products/suspension-techniques-st-coilovers-bmw-3-series-e93-06-11-80405.html

1221.86$

0

TEIN Euro Coilover System BMW 3 Series E90 Sedan 06-11 (GSJ14-M1AS3)

3092.25$

0

TEIN Super Street Coilover System Pillow Ball Mount BMW 3-Series Coupe (E92) 07-11 (DSJ14-2UAS1)

2034.38$

0

TEIN Super Street Coilover System Pillow Ball Mount BMW 330i Sedan (E90) 06-11 (DSJ14-2UAS1)

2034.38$

0

TEIN Super Street Coilover System Pillow Ball Mount BMW 335i Sedan (E90) 07-11 (DSJ14-2UAS1)

2034.38$

0

Vorshlag Camber / Caster Plates BMW E90 E92 non-M3 06-11 (VM-CP-E90-00)

Vorshlag Camber / Caster Plates BMW E90 E92 non-M3 06-11

Model: VM-CP-E90-00

Производитель: Vorshlag

Vorshlag Camber / Caster Plates BMW E90 E92 non-M3 06+

This catalog entry is for Vorshlag camber-caster plates to fit both the E90 3-series and E82 1-series BMW Coupes and Sedans. This camber plate can be used with either OEM Style springs or Coilover springs and virtually any strut type. Please choose the appropriate spring and strut from the option drop-downs below. Does not fit E90/92 M3 model.

Easily adjust camber track side with Vorshlag camber/caster plates. Oversized spherical bearings are designed to withstand the rigors of street and track abuse. All components are allow steel and plated for maximum corrosion resistance and long life.

In order to properly use Vorshlag camber plates, you must choose the option below to include Vorshlag upper spring perches that match your strut brand and spring type. Vorshlag camber/caster plates are designed to be compatible with 2.5", 2.25" and 60mm coilover style, springs, OEM (stock) style springs and all strut types. We make numerous variations of this plate and accompanying perches to work with your set-up. The Vorshlag upper perches allow us to add a sealed radial bearing that isolates the spherical bearing in the camber plate from radial turning loads of of the strut shaft during steering inputs. This is part of why our plates last the lifetime of the car!
-Compatible with 2.5", 2.25" and 60 mm coilover springs, factory springs, OEM Style Lowering springs and all struts.
-No need to change camber plates when switching from regular springs to coilovers - some companies sell you two totally different camber plates for coilover springs and factory style springs.
-Installs with basic hand tools, no chassis modifications required.
-Plates are designed specifically for BMW E82 & E87 (1 series) and E90 or E92 (3 series) chassis (except E90/E92 M3).
-Caster & Camber are independently adjustable.
-Camber is easily adjustable at the track from the engine compartment with simple (metric) hand tools. No need to reach inside the wheel well with a wrench to tighten.
-The spherical bearing used in the Vorshlag camber plate is the largest used in any BMW camber plate on the market. The result is much better durability and wear characteristics than the undersized bearings used in our competitors; plates.
-Designed for maximum suspension travel (bump travel). More than an inch more strut travel than some of our competitors; designs.
-100% CNC machined, alloy steel construction - Tough as a German Tank!
-All components plated for maximum corrosion resistance and long life.
-Engraved with Vorshlag logo, alignment hash marks, applicable model, and side/front orientation.
-Vorshlag Upper spring perches required (see "Spring Perch" drop down option menu, below)
-Maximum negative camber setting depends on caster setting, ride height, and is ultimately limited by the strut tower opening on these chassis. The E82/90/92 strut tower hole is more restrictive than previous generation BMWs. Expect to get -2 to -3.5 max camber, depending on ride height.
-New and improved .25" thick top ring (introduced Dec 2008) for increased clearance between Vorshlag long reach M12x1.5 strut top nut to factory (faux) strut brace. Improved low profile bolt ring for more clearance when used with OEM style perches.

Please select both Strut Style and Spring Perch Size. Custom